Pool Dealers

No doubt having a pool installed is a decision that needs careful and calculated planning, especially for first-time owners. Pool Dealers help people find the right pool that satisfies their needs and desires, from the desired pool shapes and pools suited to the available financing.

Pool Dealers will also help people to install their pools. They bring in first-class installation equipment that can pull off Prefabricated and custom-made designs perfectly. Also, pools may break down from time to time. A good pool dealer will aid in maintenance using automatic pool cleaners and water care experts.

Pool Installation

Before bringing in a pool dealer to install a pool, one must first decide if they want an above-ground or in-ground pool. Many people choose these different pools based on convenience, space, and money.

Above-ground Pool

Above ground pools range from economic models to more luxurious ones. These pools are usually more convenient and easier to set up because they don\’t need foundations. The cost of setting up an above-ground pool depends on various factors such as model, warranty, size, height, etc.

Most above-ground pools are offered in two shapes- oval and round. The smaller ones are 12-18 feet in diameter, while the larger pools have up to 33 feet round or 21 by 41 in an oval shape.

What Is The Depth Of Above-Ground Pools ?

Above ground pool depth ranges from 48-54 inches deep or 4-4.5 feet deep. However, there isn\’t any standard depth because it differs with the manufacturers.

How To Install An Above-ground Pool

Pool Dealers do the best installation of above-ground pools. However, for those who are handy, it can be done successfully by careful planning and preparation. Below are some simple steps to follow when installing an above-ground pool.

Organize

Having the correct tools is essential because it aids the installer to work efficiently and keep track of the work as it progresses. It is recommended that the materials be separated and organized, so they are easily accessible. Some of the materials are;

• Shovel
• Duct Tape
• Sand
• Phillips Head screwdriver
• Skimmer
• Measuring Tape
• Carpenter\’s level
• Landscape stake
• C-clamps
• Patio Blocks(2\” by 8\” by 16\”)
• Box Cutter
• 5/16 wrench
• ¼ Wrench

Analyze

The next step is for the pool dealer or installer to find a high enough level to accommodate the pool. It is essential to check for utility lines and underground plumbing. Also, ensure that the installation is in line with state laws before construction.

Measure

After analyzing, the next step is to find the pool\’s center. To find the pool\’s center, one must measure off an existing object. Then, measure half the pool\’s width and stake the tape measure at that point.

To give some extra-work room, pull the measuring tape to the radius and add an extra foot. Then, a marker is placed at the center and the perimeter is traced.

Clearing The Area

Before beginning to place the pool, it is vital to clear the area of any rocks, sod, roots, and debris. This debris might puncture the pool if not correctly removed. The smoother the pool floor, the better placed the pool.

Level Out The Area

Clearing rocks and sod may disturb the level of the ground. That is why proper leveling must be done after the area is cleared. The pool dealer or installer can use a leveler to find the highest point in the installation area and dig to create a level surface. An efficient pool dealer will know not to lift low areas but instead, flatten out high regions.

Laying Down The Rails

There are different bottom plates and stabilizers for railing around the pool. Some bottom leaves are; metal, resin, and resin bottom cuff. Stabilizer rails also come in three different types, which are; crimped on one side, smaller bottom rails, and male and female bottom rails.

Connecting Each Bottom Rail

After leveling out and sorting out the rails, the next step is to connect each rail to the appropriate bottom plate. Metal, resin, and resin bottom cuff will connect to the bottom rails similarly. After the railings attach to the bottom plates, one can measure the diameter in different areas to ensure that the base is round. After confirming that the floor is round, the ring is staked into position.

Blocking The Bottom Plates

To improve the support structure, one can place a patio block underneath each bottom plate. It is vital to dig out the area and place each block in the recessed hole. Placing the blocks will ensure stability so that the track will still lay level to the ground.

Also, one should always check to ensure that block is level in all areas. Then the bottom plates should also get checked to make sure they are within half a distance of each other.

Adding A Pool Base

When the support structures are in place, the next step is to add the pool base. One bottom rail can get removed to cart in the sand easily. The installer should mark the placement of the two bottom plates, thus ensuring the exact position after dumping in the sand. The sand should be spread equally around the pool area, and the earlier removed bottom rail should be replaced.

Installing The Wall

Installing the wall may be a bit difficult. However, a certified pool dealer will quickly scale the hurdle. If the wall is uneven, a landscaper will come in handy to support the wall as the bottom track perimeter is installed.

The next step is to install single-row wall bars; one should first place rivets on the wall. Then, attach the wall bolts using hand tools. The next step is to fill all the holes with a bolt. Ensure that the wall bars aren\’t touching each other. Finally, cover the bolt head inside the pool using three layers of duct tape.

After covering the bolt head, install staggered wall bars. The wall bars should first be attached, then the same steps as installing a single row wall bars should be followed.

Create A Cove

Coves are essential for support. If one is looking to build a sturdy and long-lasting cove, it is vital to install a pool cove liner protection. Using a pool cove liner will ensure perfectly smooth covers around the pool flooring.

Mounting The Uprights

The next step is to install the uprights into each bottom plate. Uprights are essential for strengthening the pool wall and supporting the pool. The installer should make sure that the uprights are tightly fitted into the bottom plates to prevent the pool wall from toppling over.

Tamper The Sand

Next, tamper the base of the pool to ensure a smooth floor. It is crucial to tamp the full extent of the pool bottom adequately. Also, wetting the sand will make the tamping easier.

Liner Installation

The liner is a vital part of an above-ground pool and must be installed carefully. To establish a beaded liner, separate the bead track at the top of the pool wall and snap back the beaded liner into the track.

Attach Stabilizer Rails And Plates

The stabilizer rails slide into each, going around the pool, ensuring the pool maintains its circular shape. The top plates are secured in place using an upright. One can use a leveler to ensure the uprights are perpendicular to the ground. Making use of a leveler in this manner will ensure maximum pool stability.

Slowly Put In Water

It is advisable to fill in the water halfway and install the skimmer and return fittings. Once installed, the filter system and the pumps should get connected. After installing all the equipment, the pool is filled to the brim.

How Much Does It Cost To Install A Pool

Two main factors affect the cost of a pool, they are- the pool and the pool kit. Above-ground pools are installed for 3000-10,000 USD. In-ground pools cost about 35,000 USD on average. These costs are dependent on the shapes, sizes, and equipment of the collection.

The more resin and less metal the pool has, the higher the price and the longer it will last. It is important to note that oval-shaped pools cost more to install. The cost of labor is dependent on the location of the pool dealer.

How To Repair An In-ground Pool

No matter how well an in-ground pool is installed, there\’d be occasional cracks, hollow spots, and chips on the surfaces. However, with the right tools, it is easy to fix these cracks. Below are some simple steps to repair an in-ground pool.

Removing The Damaged Surface

If three are any damaged substrates, a concrete grinder can cut them out. It is wise to extend the cut out at least one inch beyond the levels of the original crack. Safety goggles and gloves are essential when working with a concrete grinder.

Using a chisel and hammer, make a pockmark on the pool surface. These marks will help to patch material bonds better.

Locate Hollow Spots

The next step is to locate spots where the plaster has separated from the gunite. These are usually found beneath the pool. A slight separation of plaster from the gunite will, over time, lead to large cracks. These potentially troubled spots should be fixed in due time.

Gently Tapping on the pool surface will produce a hollow sound if the plaster is no longer tight. When the sound is located, remove the plaster and replace it with a filling mixture.

Cleaning The Substrate

It is vital to clean dust and concrete off the surface undergoing repair. After cleaning the surface, it should be covered with an acid rinse. Note that working with acid is dangerous, hence, safety equipment must be on at all times.

Fill Cracks

Caulk makes an excellent filling material. One should leave a space of ¼ between the caulk and the top of the crack. Leaving a ¼ space will allow an even application of plaster. Caulk will stiffen and dry in 24 hours; after it dries, the plaster should be applied.

Texture The Surface

The old surface may have a rougher texture than the newly patched area. Matching the old cover using the new wet patch is essential in creating an all-around neat finish. After a successful pool repair, it is vital to fill it with water immediately.

Conclusion

Unskilledpersons will find it difficult to install, maintain and repair a pool. However, with the services of an experienced pool dealer, having a pool fixed becomes an easy task to accomplish. Pool owners should make adequate inquiries and find the best pool dealers for their needs.