Laguna Bay Hot Tub Parts

Laguna bay hot tubs are a name synonymous with relaxation. Providing hours of fun to families across America, they had and continue to deliver utmost pleasure to several households.

These units are manufactured with premium quality materials so that the owners can expect to avail the pleasure associated with them for years to come.

They feature HeatFlow Technology that captures and recycles natural energy to heat the hot tub. The result is year-round fun along with minimal maintenance and lower energy costs. Plus, the features don’t end here. Some models of laguna bay hot tubs include hydromassage, personal massaging jets, and audio and lighting systems to make the spa experience more personalized and captivating.

The enjoyment and relaxation these unite bring is outstanding. And this is all made possible with the inclusion of the state-of-the-art laguna bay hot tub parts. These units feature durable and affordable parts that offer you the opportunity to experience the advantages of a sizeable hot tub whenever you want.

If you\’ve been endlessly scouring the market in search of quality laguna bay hot tub parts, then your search is about to stop. Below we shall discuss some brands that manufacture and sell durable and quality laguna bay hot tub parts at affordable prices. But before that, let\’s discuss some important parts of laguna bay hot tubs.

Parts of a Laguna Bay Hot Tub

Spa Pack

It is the computer of a laguna bay hot tub. By pressing the buttons on its topside controls, you will trigger reactions in the spa pack. The ‘jets’ button causes the pump to push the water back into the hot tub through the jets. Pressing the ‘temperature up’ triggers the spa pack to turn on the heater and pump the circulating water till it attains the desired temperature.

Topside Control

It is like the keyboard of the computer. It permits you to change the working of the spa through buttons. Temperature, energy consumption, jets, and filtration all can be controlled by pressing the button on the spas topside control. The options on the spa control can vary depending on the model of the laguna bay hot tub.

Spa Heater

As the name indicates, this part of the laguna bay hot tub heats the water. When the temperature of the water falls below the permitted temperature range, the heater turns on and heats the water as per the preset temperatures. A light on the top of the heater turns on, indicating that the heater is active.

Laguna bay hot tubs are designed to keep the water warm and prevent heat loss. If your hot tub’s water is set lower than the ambient temperature, your hot tub won’t lose enough heat to decrease the water temperature to the selected temperature if your ambient temperature doesn’t go down.

Moreover, the spa controls don’t cool the water. In case you want to lower the water temperature, you have to partially remove its cover for a short while or drain some of the tub water and add some cool water.

Drain Valve

The drain valve removes water from your spa. It is present at the base, near the corner of the tub cabinet. It is attached to a hose within the cabinet that enables smooth draining of all the water from the tub. It moves inward to close the drain valve and outward to open it.

Spa Pump

This laguna bay hot tub part forces water through plumbing lines into jets. It can be turned on or off by pressing the button on the topside controls. The speed and number of pumps in a spa vary according to its model.

The spa pump is designed to push water and not air. If air is present in the plumbing line or pump, it can get trapped in the tub and prevent the circulation of water. Running your spa in the presence of an air lock can damage your pump.

Air locks can be prevented by filling your spa properly or by ‘bleeding’ the pump before turning the spa on. If the water isn’t coming out from the jets and you can hear the pump ‘humming’ when the jets button is pressed, there are chances of an air lock.

Slice Valves

They close the plumbing lines and permit service of the hot tub without draining water from it. They are located in the plumbing lines close to the pump. During the servicing of the laguna bay hot tub, the lock is opened, and the slice valve is pushed down, creating a seal and enabling the parts between them to be serviced. When the service is finished, the valves can be raised and then locked in an upward position.

These valves have to be locked in the upward position when the spa is turned on in order to prevent any damage. Moreover, you should always ensure the locks on this valve are in the right condition each time you change the water of the hot tub. The locks need to be changed if they cannot hold it in the upward position.

Filter Assembly

It consists of a filter, floating weir, and filter basket. A filter assembly that is not positioned in the correct place is a drowning hazard, let alone be damage to the spa. Similarly, if any part of a filter basket is damaged, you should not use the hot tub until it is replaced.

Since the filter and filter basket catches debris, you should make sure they both are clean and in the right condition. Mostly the manufacturer recommends replacing the filter after every 3 months.

Suction Drain Covers

These are located on the sides, in the footwell of the tub. They are caps, which cover the suction drain and prevent debris from going into the plumbing lines. Keeping them clean is necessary to allow an unrestricted flow of water. Moreover, checking them regularly helps prevent the risk of drowning as well. You shouldn’t use the spa if they need replacement.

Diverter Valve

It’s a big rotating valve located on the top of the spa and is used to regulate the water flow between spa sections controlled by each spa pump. It can be rotated right and left. Some have built-in stops that shouldn’t be forced to turn past the stop to prevent any damage.

When the valve is present in the center, water spreads evenly in every area of the tub controlled by this valve. Turning it all on one side restricts the flow of water from one section and flows all into another section. And turning it all on the opposite side reverses the water flow to the other side of the spa.

Air Valve

This is a small rotating valve present on the top of the spa, which looks similar to the diverter valve but is smaller in size. An air valve can increase or decrease airflow through the jets. When you increase the airflow, it creates a bubble action when water enters the tub.

It can rotate right and left, and like the diverter valve, it shouldn’t be over turned if it has built-in stops. Forcing the air valve past its built-in stop can damage your laguna spa.

When the valve is in the center, there’s a moderate airflow with a moderate bubble action. When turned completely to one side or closed, there’s less airflow with fewer bubbles, and if turned completely to the other side, it is fully open and creates maximum bubbles.

Waterfall Valve

It increases or decreases flow through the waterfall.  Similar to the laguna bay hot tub\’s other valves, it can rotate right and left. The ones with built-in stops shouldn’t be over turned as this can damage your spa.

When the valve is in the center, there’s a moderated flow in the waterfall. If it is rotated all in one direction, there will be no flow of water in the waterfall. When turned completely in the opposite direction, the flow increases resulting in maximum flow in the waterfall.

Companies Selling Laguna Bay Hot Tub Parts

Spa Depot

Established in 1997, Spa Depot has been a known name among the hot tub suppliers in the USA. When it comes to laguna bay hot tub parts, they aren’t behind anyone in the business. Those searching for premium hot tub filters, pumps, covers, jets, controls, or heaters should know they are in the right place. They offer the best quality replacement parts for your spa.

Hot Tub Parts Sales

Located in Holly Springs, Georgia, Hot Tub Parts Sales is a trusted brand for providing ultra laguna bay spa parts to its customers when they need replacement. They offer energy saver hot tub heaters, jets, pumps, pump parts, filter assemblies, plumbing unions, and much more compatible with your spa model.

Energy Saver Spa Equipment

Energy Saver Spa Equipment is located in East Tennessee and takes pride in manufacturing energy-efficient spa equipment. From pumps, heaters, and controls to jets, lighting, and plumbing, they have been designing a complete line of spa controls and equipment for more than ten years. Those dreading that power bill every month should opt for their high-performance laguna bay hot tub parts without any doubt.